Audiobahn AWES12P

12″ subwoofer · DVC · 1,100 W RMS

25 HzFs, resonance
0.50Qts
2.14 ft³Vas
0.51″Xmax
1,100 WRMS

The Audiobahn AWES12P is a 12″ subwoofer. With Qts 0.50 and EBP 45 it suits a sealed box: tight bass in a small enclosure; a ported box would need a lot of volume.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions2 of 4 — missing: frame outer diameter, magnet diameter; the designer will use an estimate
The published specs don’t add up:

Recommended box

For a sedan, one sub, 1,100 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.41 ft³ (40 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.80
Fc40 Hz
F3 (−3 dB, no cabin gain)38 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 17 9/16″
Open sealed box in designer

Ported

deeper, louder
1.70 ft³ (48 L)
Net volume
Tuning (Fb)30 Hz
Portslot 1 15/16 × 14 5/16″, 45 1/16″ long
Port velocity at 1,100 W67 ft/s
F3 (−3 dB, no cabin gain)28 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 7/16″
Open ported box in designer

Deeper: 2.90 ft³ (82 L) tuned to 26 Hz, 31 1/2″ × 15 3/4″ × 18 13/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsDVC
RMS power1,100 W
Fs25 Hz
Qts0.50
Qes0.55
Qms5.89
Vas2.14 ft³
Re (one coil)3.6 Ω
Sd74.4 in²
Xmax0.51″
Vd38.1 in³ calc.
Mms219 g calc.
BL15 T·m calc.
EBP45 — suits sealed calc.
Sensitivity, 1 W / 1 m84.4 dB calc.

Mounting dimensions

Ø≈ 12 1/16″cutout Ø10 7/8″mounting depth 8 5/8″magnet Ø≈ 7 1/16″
Cutout diameter10 7/8″
Mounting depth8 5/8″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AWES12P need?

Recommended net volume: 1.41 ft³ sealed, 1.70 ft³ ported tuned to 30 Hz — for one sub in a sedan at 1,100 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AWES12P Thiele/Small specs?

Fs 25 Hz, Qts 0.50, Vas 2.14 ft³, Xmax 0.51″, Sd 74.4 in².

What is the Audiobahn AWES12P mounting depth?

Mounting depth is 8 5/8″, cutout diameter 10 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AWES12P handle and how do I wire it?

RMS power rating: 1,100 W. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AWES12P better sealed or ported?

EBP 45: a sealed box (1.41 ft³) suits it best — tight bass in a compact enclosure. Ported is possible (1.70 ft³, tuned to 30 Hz) but larger.

What port does the Audiobahn AWES12P need?

For the 1.70 ft³ ported box tuned to 30 Hz: slot 1 15/16 × 14 5/16″, 45 1/16″ long, area 28.2 in²; or a round port Ø6″, ≈ 45 1/16″ long. Port air speed at 1,100 W: 67 ft/s.

What box do two Audiobahn AWES12P subs need?

Two subs need twice the volume: 2.83 ft³ sealed, or 3.39 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.