Audio System H12 EVO
12″ subwoofer · dual 2 Ω · 2,200 W RMS
Fs 36 HzQts 0.45Vas 0.86 ft³Xmax 0.87″
The published specs don’t add up:
- Fs, Vas and Sd don't match the moving mass of 234.121 g (they give 325 g) — one of the spec sheet values is probably wrong.
Recommended box
For a sedan, one sub, 2,200 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 1.01 ft³ (28.5 L) |
|---|---|
| Qtc | 0.61 |
| Fc | 49 Hz |
| F3 (−3 dB, no cabin gain) | 60 Hz |
| Example box (outside) | 14 9/16″ × 14 9/16″ × 12 9/16″ |
Ported
| Net volume | 1.59 ft³ (45 L) |
|---|---|
| Tuning (Fb) | 32 Hz |
| Port | round port Ø2 1/2″, 6 3/8″ long |
| Port velocity at 2,200 W | 631 ft/s |
| F3 (−3 dB, no cabin gain) | 29 Hz |
| Example box (outside) | 19 15/16″ × 15 3/4″ × 12 5/8″ |
Thiele/Small parameters
| Fs | 36 Hz |
|---|---|
| Qts | 0.45 |
| Qes | 0.498 |
| Qms | 4.42 |
| Vas | 0.86 ft³ |
| Re (one coil) | 1.9 Ω |
| Sd | 82.8 in² |
| Xmax | 0.87″ |
| Vd | 71.7 in³ calc. |
| Mms | 325 g calc. |
| BL | 16.7 T·m calc. |
| EBP | 72 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 85.6 dB calc. |
General
| Size | 12″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 2,200 W |
Mounting dimensions
| Cutout diameter | 11 7/16″ |
|---|---|
| Mounting depth | 10 1/16″ |
| Overall diameter | 12 13/16″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- audio-system.de/wp-content/uploads/2020/02/BDA-H12EVO.pdf
- audio-system.de/produkte/subwoofer/h-serie/
Other Audio System 12″ models
- Audio System HX 12 SQ 12″ · 4 Ω
- Audio System M12 EVO 2 12″ · dual 2 Ω
- Audio System R 12 12″ · 4 Ω
- Audio System R 12 FLAT 12″ · 4 Ω
- Audio System R12 FA EVO 12″ · 4 Ω
- Audio System X12 EVO 12″ · dual 2 Ω