Diamond M6 12D4

12″ subwoofer · dual 4 Ω

32 HzFs, resonance
0.49Qts
1.02 ft³Vas
0.63″Xmax

The Diamond M6 12D4 is a 12″ subwoofer. With Qts 0.49 and EBP 59 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions0 of 4 — missing: cutout, mounting depth, frame outer diameter, magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
0.71 ft³ (20 L)
Net volume
Bass character (Qtc)Flat and accurate · 0.77
Fc50 Hz
F3 (−3 dB, no cabin gain)49 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 10 1/16″
Open sealed box in designer

Ported

deeper, louder
1.24 ft³ (35 L)
Net volume
Tuning (Fb)34 Hz
Portslot 1 9/16 × 14 5/16″, 38 5/16″ long
Port velocity at 300 W44 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 9 9/16″
Open ported box in designer

Deeper: 1.98 ft³ (56 L) tuned to 29 Hz, 31 1/2″ × 15 3/4″ × 12 1/8″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsdual 4 Ω
RMS power—
Fs32 Hz
Qts0.49
Qes0.54
Qms5.29
Vas1.02 ft³
Re (one coil)3.1 Ω
Sd77 in²
Xmax0.63″
Vd48.5 in³ calc.
Mms299 g calc.
BL18.6 T·m calc.
EBP59 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.4 dB calc.

Mounting dimensions

Ø≈ 12 5/16″cutout ≈ Ø11 1/8″mounting depth ≈ 5 7/8″magnet Ø≈ 7 3/16″
Cutout diameter≈ 11 1/8″
Mounting depth≈ 5 7/8″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Voice coil versions

The same sub with different voice coils: the parameters are nearly the same — pick by your amp and wiring.

ModelVoice coilsReQesVasSealedPorted
Diamond M6 12D2dual 2 Ω1.65 Ω0.551.07 ft³0.71 ft³1.24 ft³ · 34 Hz
Diamond M6 12D4dual 4 Ω3.1 Ω0.541.02 ft³0.71 ft³1.24 ft³ · 34 Hz

Other Diamond 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Diamond M6 12D4 need?

Recommended net volume: 0.71 ft³ sealed, 1.24 ft³ ported tuned to 34 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Diamond M6 12D4 Thiele/Small specs?

Fs 32 Hz, Qts 0.49, Vas 1.02 ft³, Xmax 0.63″, Sd 77 in².

Is the Diamond M6 12D4 better sealed or ported?

EBP 59: both work — sealed 0.71 ft³ is tighter and smaller, ported 1.24 ft³ tuned to 34 Hz is deeper and louder.

What port does the Diamond M6 12D4 need?

For the 1.24 ft³ ported box tuned to 34 Hz: slot 1 9/16 × 14 5/16″, 38 5/16″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 38 5/16″ long. Port air speed at 300 W: 44 ft/s.

What box do two Diamond M6 12D4 subs need?

Two subs need twice the volume: 1.41 ft³ sealed, or 2.47 ft³ ported at the same 34 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.