Audiobahn AWC12Q

12″ subwoofer · 500 W RMS

31.4 HzFs, resonance
0.59Qts
2.44 ft³Vas
0.31″Xmax
500 WRMS

The Audiobahn AWC12Q is a 12″ subwoofer. With Qts 0.59 and EBP 44 it suits a sealed box: tight bass in a small enclosure; a ported box would need a lot of volume. Modest excursion (Xmax 0.31″) — for clean sound at moderate levels, not for SPL competitions.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.80 ft³ (51 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.91
Fc48 Hz
F3 (−3 dB, no cabin gain)42 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 9 1/16″
Open sealed box in designer

Ported

deeper, louder
1.94 ft³ (55 L)
Net volume
Tuning (Fb)34 Hz
Portslot 1 9/16 × 14 5/16″, 22 15/16″ long
Port velocity at 500 W57 ft/s
F3 (−3 dB, no cabin gain)33 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 1/4″
Open ported box in designer

Deeper: 3.07 ft³ (87 L) tuned to 34 Hz, 31 1/2″ × 15 3/4″ × 15 13/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coils—
RMS power500 W
Fs31.4 Hz
Qts0.59
Qes0.71
Qms3.57
Vas2.44 ft³
Re3.3 Ω
Sd79.1 in²
Xmax0.31″
Vd24.9 in³ calc.
Mms137 g calc.
BL11.2 T·m calc.
EBP44 — suits sealed calc.
Sensitivity, 1 W / 1 m86.8 dB calc.

Mounting dimensions

Ø12 1/2″cutout Ø10 7/8″mounting depth 5 1/16″magnet Ø≈ 7 1/16″
Cutout diameter10 7/8″
Mounting depth5 1/16″
Overall diameter12 1/2″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AWC12Q need?

Recommended net volume: 1.80 ft³ sealed, 1.94 ft³ ported tuned to 34 Hz — for one sub in a sedan at 500 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AWC12Q Thiele/Small specs?

Fs 31.4 Hz, Qts 0.59, Vas 2.44 ft³, Xmax 0.31″, Sd 79.1 in².

What is the Audiobahn AWC12Q mounting depth?

Mounting depth is 5 1/16″, cutout diameter 10 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AWC12Q handle and how do I wire it?

RMS power rating: 500 W. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AWC12Q better sealed or ported?

EBP 44: a sealed box (1.80 ft³) suits it best — tight bass in a compact enclosure. Ported is possible (1.94 ft³, tuned to 34 Hz) but larger.

What port does the Audiobahn AWC12Q need?

For the 1.94 ft³ ported box tuned to 34 Hz: slot 1 9/16 × 14 5/16″, 22 15/16″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 22 15/16″ long. Port air speed at 500 W: 57 ft/s.

What box do two Audiobahn AWC12Q subs need?

Two subs need twice the volume: 3.60 ft³ sealed, or 3.88 ft³ ported at the same 34 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.