Audiobahn AW1206T

12″ subwoofer · dual 4 Ω · 1,100 W RMS

31.5 HzFs, resonance
0.35Qts
1.17 ft³Vas
0.71″Xmax
1,100 WRMS

The Audiobahn AW1206T is a 12″ subwoofer. With Qts 0.35 and EBP 79 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 1,100 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
0.64 ft³ (18 L)
Net volume
Bass character (Qtc)Dry and tight · 0.58
Fc53 Hz
F3 (−3 dB, no cabin gain)70 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 9 5/16″
Open sealed box in designer

Ported

deeper, louder
2.01 ft³ (57 L)
Net volume
Tuning (Fb)35 Hz
Portslot 2 15/16 × 14 5/16″, 40 1/2″ long
Port velocity at 1,100 W64 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 14 5/8″
Open ported box in designer

Deeper: 1.31 ft³ (37 L) tuned to 32 Hz, 22 1/16″ × 15 3/4″ × 14″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsdual 4 Ω
RMS power1,100 W
Fs31.5 Hz
Qts0.35
Qes0.4
Qms2.53
Vas1.17 ft³
Re (one coil)3 Ω
Sd68.2 in²
Xmax0.71″
Vd48.3 in³ calc.
Mms212 g calc.
BL17.7 T·m calc.
EBP79 — sealed or ported calc.
Sensitivity, 1 W / 1 m86.1 dB calc.

Mounting dimensions

Ø12 5/16″cutout Ø10 7/8″mounting depth 6 3/4″magnet Ø≈ 7 1/16″
Cutout diameter10 7/8″
Mounting depth6 3/4″
Overall diameter12 5/16″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AW1206T need?

Recommended net volume: 0.64 ft³ sealed, 2.01 ft³ ported tuned to 35 Hz — for one sub in a sedan at 1,100 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AW1206T Thiele/Small specs?

Fs 31.5 Hz, Qts 0.35, Vas 1.17 ft³, Xmax 0.71″, Sd 68.2 in².

What is the Audiobahn AW1206T mounting depth?

Mounting depth is 6 3/4″, cutout diameter 10 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AW1206T handle and how do I wire it?

RMS power rating: 1,100 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AW1206T better sealed or ported?

EBP 79: both work — sealed 0.64 ft³ is tighter and smaller, ported 2.01 ft³ tuned to 35 Hz is deeper and louder.

What port does the Audiobahn AW1206T need?

For the 2.01 ft³ ported box tuned to 35 Hz: slot 2 15/16 × 14 5/16″, 40 1/2″ long, area 42.3 in²; or a round port Ø7 5/16″, ≈ 40 1/2″ long. Port air speed at 1,100 W: 64 ft/s.

What box do two Audiobahn AW1206T subs need?

Two subs need twice the volume: 1.27 ft³ sealed, or 4.03 ft³ ported at the same 35 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.