Sundown Audio NSv6-10 D2

10″ subwoofer · dual 2 Ω · 3,500 W RMS

Fs 43.8 HzQts 0.33Vas 0.23 ft³Xmax 1.38″

Recommended box

For a sedan, one sub, 3,500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.04 ft³ (29.5 L)
Qtc0.37
Fc48 Hz
F3 (−3 dB, no cabin gain)114 Hz
Example box (outside)13 3/8″ × 13 3/8″ × 14 3/4″
Open sealed box in designer

Ported

Net volume1.09 ft³ (31 L)
Tuning (Fb)26 Hz
Portslot 1 15/16 × 14 5/16″, 97 1/2″ long
Port velocity at 3,500 W115 ft/s
F3 (−3 dB, no cabin gain)101 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 13 7/16″

The volume and tuning are the recommendation, but the port doesn’t fit this example box. Size the box and port in the designer.

Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs43.8 Hz
Qts0.33
Qes0.363
Qms4.27
Vas0.23 ft³
Re (one coil)1.81 Ω
Sd56.9 in²
Xmax1.38″
Vd78.3 in³ calc.
Mms388 g calc.
BL23.1 T·m calc.
EBP121 — suits ported calc.
Sensitivity, 1 W / 1 m83.8 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power3,500 W

Mounting dimensions

Ø11 13/16″cutout Ø10 1/8″mounting depth 12 1/4″magnet Ø7 7/8″
Cutout diameter10 1/8″
Mounting depth12 1/4″
Overall diameter11 13/16″
Magnet diameter7 7/8″

The spec sheet's Sd of 78.5 in² is the area of a 10″ circle, not the cone's radiating area — not used.

Cone area (Sd) calculated from Fs, Vas and Mms: 56.9 in².

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Sundown Audio 10″ models