Audiobahn AW1008X
10″ subwoofer · 1,000 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | not in the spec sheet: Sd — typical value for the size used |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Dry and tight · 0.55 |
|---|---|
| Fc | 38 Hz |
| F3 (−3 dB, no cabin gain) | 53 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 9 1/8″ |
Ported
deeper, louder| Tuning (Fb) | 41 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 16 7/8″ long |
| Port velocity at 1,000 W | 193 ft/s |
| F3 (−3 dB, no cabin gain) | 34 Hz |
| Example box (outside) | 19 5/16″ × 15 3/4″ × 8 7/16″ |
At 1,000 W this example’s port will be noisy: air speed 193 ft/s, while the limit is 82 ft/s. It stays quiet up to about 180 W. Full power needs a port of at least 23.5 in², which means a bigger box than this example — size it in the designer.
Open ported box in designerDeeper: 1.02 ft³ (29 L) tuned to 33 Hz, 21 5/8″ × 15 3/4″ × 8 7/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | — |
| RMS power | 1,000 W |
| Fs | 29.7 Hz |
| Qts | 0.43 |
| Qes | 0.46 |
| Qms | 7.3 |
| Vas | 0.30 ft³ |
|---|---|
| Re | 1.05 Ω |
| Sd | ≈ 52.7 in² |
| Xmax | 0.83″ |
| EBP | 65 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 78.9 dB calc. |
Mounting dimensions
| Cutout diameter | 9 1/4″ |
|---|---|
| Mounting depth | 6″ |
| Overall diameter | 10 7/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10N 10″ · dual 6 Ω
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Sky High Car Audio BMX-10 D2 0.60 ft³ sealed · 1.31 ft³ ported
- Sundown Audio SAv3-10 D4 0.60 ft³ sealed · 1.02 ft³ ported
- DL Audio Phoenix 10 (2+2) 0.49 ft³ sealed · 0.85 ft³ ported
- Sundown Audio Xv4-10 D2 0.87 ft³ sealed · 1.52 ft³ ported
- Diamond D610D2 0.46 ft³ sealed · 0.78 ft³ ported
- Sundown Audio Zv6-10 D1 0.94 ft³ sealed · 1.52 ft³ ported
FAQ
What box does the Audiobahn AW1008X need?
Recommended net volume: 0.49 ft³ sealed, 0.85 ft³ ported tuned to 41 Hz — for one sub in a sedan at 1,000 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn AW1008X Thiele/Small specs?
Fs 29.7 Hz, Qts 0.43, Vas 0.30 ft³, Xmax 0.83″.
What is the Audiobahn AW1008X mounting depth?
Mounting depth is 6″, cutout diameter 9 1/4″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn AW1008X handle and how do I wire it?
RMS power rating: 1,000 W. Wiring for several subs and amp power — in the wiring calculator.