American Bass VELOCITY-1511
15″ subwoofer · dual 1 Ω · 2,200 W RMS
Fs 30 HzQts 0.31Vas 1.84 ft³Xmax 0.69″
Recommended box
For a sedan, one sub, 2,200 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 1.32 ft³ (37.5 L) |
|---|---|
| Qtc | 0.49 |
| Fc | 46 Hz |
| F3 (−3 dB, no cabin gain) | 77 Hz |
| Example box (outside) | 16 15/16″ × 16 15/16″ × 12 3/16″ |
Ported
| Net volume | 2.22 ft³ (63 L) |
|---|---|
| Tuning (Fb) | 29 Hz |
| Port | slot 2 3/8 × 16 5/16″, 49 7/8″ long |
| Port velocity at 2,200 W | 95 ft/s |
| F3 (−3 dB, no cabin gain) | 29 Hz |
| Example box (outside) | 31 1/2″ × 17 11/16″ × 14 3/4″ |
Thiele/Small parameters
| Fs | 30 Hz |
|---|---|
| Qts | 0.31 |
| Qes | 0.337 |
| Qms | 4.57 |
| Vas | 1.84 ft³ |
| Re (one coil) | ≈ 0.85 Ω |
| Sd | 115.5 in² |
| Xmax | 0.69″ |
| Vd | 79.5 in³ calc. |
| Mms | 424 g calc. |
| BL | 14.2 T·m calc. |
| EBP | 89 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 88.2 dB calc. |
General
| Size | 15″ |
|---|---|
| Voice coils | dual 1 Ω |
| RMS power | 2,200 W |
Mounting dimensions
| Cutout diameter | 13 3/4″ |
|---|---|
| Mounting depth | 9 11/16″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 115.5 in².
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other American Bass 15″ models
- American Bass DX-154 15″ · 4 Ω
- American Bass DX-154v2 15″ · 4 Ω
- American Bass ELITE-1522 15″ · dual 2 Ω
- American Bass ELITE-1544 15″ · dual 4 Ω
- American Bass GF-1511 15″ · dual 1 Ω
- American Bass HD-1511 15″ · dual 1 Ω
- American Bass HD-1522 15″ · dual 2 Ω
- American Bass HURRICANE-1511 15″ · dual 1 Ω
- American Bass HURRICANE-1522 15″ · dual 2 Ω
- American Bass KING-1511 15″ · dual 1 Ω
- American Bass KING-1522 15″ · dual 2 Ω
- American Bass TITAN-1544 15″ · dual 4 Ω