American Bass HD-1522
15″ subwoofer · dual 2 Ω · 2,000 W RMS
Fs 38.5 HzQts 0.64Vas 1.60 ft³
Recommended box
For a sedan, one sub, 2,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 2.75 ft³ (78 L) |
|---|---|
| Qtc | 0.80 |
| Fc | 48 Hz |
| F3 (−3 dB, no cabin gain) | 45 Hz |
| Example box (outside) | 17 11/16″ × 17 11/16″ × 20 1/2″ |
Ported
| Net volume | 4.84 ft³ (137 L) |
|---|---|
| Tuning (Fb) | 30 Hz |
| Port | slot 4 3/4 × 17 1/16″, 42 1/8″ long |
| Port velocity at 2,000 W | 66 ft/s |
| F3 (−3 dB, no cabin gain) | 26 Hz |
| Example box (outside) | 31 1/2″ × 18 1/2″ × 25 5/8″ |
Thiele/Small parameters
| Fs | 38.5 Hz |
|---|---|
| Qts | 0.64 |
| Qes | 0.704 |
| Qms | 6.52 |
| Vas | 1.60 ft³ |
| Re (one coil) | ≈ 1.7 Ω |
| Sd | 124.9 in² |
| Xmax | ≈ 0.39″ |
| Mms | 346 g calc. |
| BL | 14.2 T·m calc. |
| EBP | 55 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 87.7 dB calc. |
General
| Size | 15″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 2,000 W |
Mounting dimensions
| Cutout diameter | 14 7/16″ |
|---|---|
| Mounting depth | 9 7/16″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 124.9 in².
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other American Bass 15″ models
- American Bass DX-154 15″ · 4 Ω
- American Bass DX-154v2 15″ · 4 Ω
- American Bass ELITE-1522 15″ · dual 2 Ω
- American Bass ELITE-1544 15″ · dual 4 Ω
- American Bass GF-1511 15″ · dual 1 Ω
- American Bass HD-1511 15″ · dual 1 Ω
- American Bass HURRICANE-1511 15″ · dual 1 Ω
- American Bass HURRICANE-1522 15″ · dual 2 Ω
- American Bass KING-1511 15″ · dual 1 Ω
- American Bass KING-1522 15″ · dual 2 Ω
- American Bass TITAN-1544 15″ · dual 4 Ω
- American Bass VELOCITY-1511 15″ · dual 1 Ω