Resilient Sounds Platinum 15 D2

15″ subwoofer · dual 2 Ω · 2,000 W RMS · also as Platinum 15 D1 (dual 1 Ω)

Specs
32 HzFs
0.42Qts
2.45 ft³Vas
1.18″Xmax
All Thiele/Small parameters ↓
Weight & fit
10″Mounting depth
13 11/16″Cutout
2,000 WRMS · dual 2 Ω
Mounting drawing ↓
Box size
1.36 ft³ sealedoutside 16 15/16″ × 16 15/16″ × 12 7/16″ · F3 57 Hz
1.98 ft³ ported, 34 Hz25 7/8″ × 17 11/16″ × 17 1/8″ · port: slot 2 3/4 × 16 5/16″, 47″ long
Box details and plans ↓

The Resilient Sounds Platinum 15 D2 is a 15″ subwoofer. With Qts 0.42 and EBP 71 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder. Long excursion (Xmax 1.18″) — built for loud music and high power.

Open ported box in designerOpen sealed box in designer
Sourceresilientsounds.com · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 2,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.36 ft³ (38.5 L)
Net volume
Bass character (Qtc)Flat and accurate · 0.70
Fc54 Hz
F3 (−3 dB, no cabin gain)57 Hz
Example box (outside)16 15/16″ × 16 15/16″ × 12 7/16″
Open sealed box in designer

Ported

deeper, louder
1.98 ft³ (56 L)
Net volume
Tuning (Fb)34 Hz
Portslot 2 3/4 × 16 5/16″, 47″ long
Port velocity at 2,000 W68 ft/s
F3 (−3 dB, no cabin gain)35 Hz
Example box (outside)25 7/8″ × 17 11/16″ × 17 1/8″
Open ported box in designer

Deeper: 3.04 ft³ (86 L) tuned to 32 Hz, 31 1/2″ × 17 11/16″ × 19 15/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size15″
Voice coilsdual 2 Ω
RMS power2,000 W
Fs32 Hz
Qts0.42
Qes0.45
Qms6.22
Vas2.45 ft³
Re (one coil)2 Ω
Sd123.9 in²
Xmax1.18″
Vd146.3 in³ calc.
Mms322 g calc.
BL17 T·m calc.
EBP71 — sealed or ported calc.
Sensitivity, 1 W / 1 m89 dB calc.

Mounting dimensions

Ø15 9/16″cutout Ø13 11/16″mounting depth 10″magnet Ø≈ 8 7/8″
Cutout diameter13 11/16″
Mounting depth10″
Overall diameter15 9/16″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

Cone area (Sd) calculated from Fs, Vas and Mms: 123.9 in².

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Voice coil versions

The same sub with different voice coils: the parameters are nearly the same — pick by your amp and wiring.

ModelVoice coilsReQesVasSealedPorted
Resilient Sounds Platinum 15 D1dual 1 Ω1 Ω0.272.15 ft³1.36 ft³3.57 ft³ · 31 Hz
Resilient Sounds Platinum 15 D2dual 2 Ω2 Ω0.452.45 ft³1.36 ft³1.98 ft³ · 34 Hz

Other Resilient Sounds 15″ models

Similar 15″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

All 15″ subwoofers in our database →

FAQ

What box does the Resilient Sounds Platinum 15 D2 need?

Recommended net volume: 1.36 ft³ sealed, 1.98 ft³ ported tuned to 34 Hz — for one sub in a sedan at 2,000 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Resilient Sounds Platinum 15 D2 Thiele/Small specs?

Fs 32 Hz, Qts 0.42, Vas 2.45 ft³, Xmax 1.18″, Sd 123.9 in².

What is the Resilient Sounds Platinum 15 D2 mounting depth?

Mounting depth is 10″, cutout diameter 13 11/16″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Resilient Sounds Platinum 15 D2 handle and how do I wire it?

RMS power rating: 2,000 W. Dual 2 Ω voice coils: series gives 4 Ω, parallel gives 1 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.

Is the Resilient Sounds Platinum 15 D2 better sealed or ported?

EBP 71: both work — sealed 1.36 ft³ is tighter and smaller, ported 1.98 ft³ tuned to 34 Hz is deeper and louder.

What port does the Resilient Sounds Platinum 15 D2 need?

For the 1.98 ft³ ported box tuned to 34 Hz: slot 2 3/4 × 16 5/16″, 47″ long, area 44.9 in²; or a round port Ø7 9/16″, ≈ 47″ long. Port air speed at 2,000 W: 68 ft/s.

What box do two Resilient Sounds Platinum 15 D2 subs need?

Two subs need twice the volume: 2.72 ft³ sealed, or 3.96 ft³ ported at the same 34 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.