Resilient Sounds Platinum 15 D1
15″ subwoofer · dual 1 Ω · 2,000 W RMS
Fs 27.8 HzQts 0.25Vas 2.15 ft³Xmax 1.18″
Recommended box
For a sedan, one sub, 2,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 1.36 ft³ (38.5 L) |
|---|---|
| Qtc | 0.41 |
| Fc | 45 Hz |
| F3 (−3 dB, no cabin gain) | 93 Hz |
| Example box (outside) | 16 15/16″ × 16 15/16″ × 12 7/16″ |
Ported
| Net volume | 2.30 ft³ (65 L) |
|---|---|
| Tuning (Fb) | 27 Hz |
| Port | slot 1 15/16 × 16 5/16″, 46 9/16″ long |
| Port velocity at 2,000 W | 107 ft/s |
| F3 (−3 dB, no cabin gain) | 76 Hz |
| Example box (outside) | 31 1/2″ × 17 11/16″ × 14 1/16″ |
Thiele/Small parameters
| Fs | 27.8 Hz |
|---|---|
| Qts | 0.25 |
| Qes | 0.27 |
| Qms | 4.56 |
| Vas | 2.15 ft³ |
| Re (one coil) | 1 Ω |
| Sd | 120 in² |
| Xmax | 1.18″ |
| Vd | 141.7 in³ calc. |
| Mms | 456 g calc. |
| BL | 17.2 T·m calc. |
| EBP | 103 — suits ported calc. |
| Sensitivity, 1 W / 1 m | 88.9 dB calc. |
General
| Size | 15″ |
|---|---|
| Voice coils | dual 1 Ω |
| RMS power | 2,000 W |
Mounting dimensions
| Cutout diameter | 13 11/16″ |
|---|---|
| Mounting depth | 10″ |
| Overall diameter | 15 9/16″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 120 in².
Judging by its value, the published Re is for both coils in series — converted to per coil.
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Resilient Sounds 15″ models
- Resilient Sounds Gold 15 D4 15″ · dual 4 Ω
- Resilient Sounds Onyx 15 D1 15″ · dual 1 Ω
- Resilient Sounds RS 15 D4 15″ · dual 4 Ω
- Resilient Sounds RS 15 V2 D4 15″ · dual 4 Ω
- Resilient Sounds Team 15 D1 15″ · dual 1 Ω