Audiobahn DUB100
10″ subwoofer · 300 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Boomy, with a bump · 0.98 |
|---|---|
| Fc | 50 Hz |
| F3 (−3 dB, no cabin gain) | 41 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 19 11/16″ |
Ported
deeper, louder| Tuning (Fb) | 42 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 16 3/4″ long |
| Port velocity at 300 W | 69 ft/s |
| F3 (−3 dB, no cabin gain) | 39 Hz |
| Example box (outside) | 20 7/8″ × 15 3/4″ × 7 11/16″ |
Deeper: 1.98 ft³ (56 L) tuned to 34 Hz, 31 1/2″ × 15 3/4″ × 11 3/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | — |
| RMS power | 300 W |
| Fs | 38 Hz |
| Qts | 0.75 |
| Qes | 0.92 |
| Qms | 3.92 |
| Vas | 0.85 ft³ |
| Re | 1.5 Ω |
|---|---|
| Sd | 51.2 in² |
| Xmax | 0.31″ |
| Vd | 16.1 in³ calc. |
| Mms | 113 g calc. |
| BL | 6.6 T·m calc. |
| EBP | 41 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 83.6 dB calc. |
Mounting dimensions
| Cutout diameter | 9 1/8″ |
|---|---|
| Mounting depth | 5 1/4″ |
| Overall diameter | 10″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10N 10″ · dual 6 Ω
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Black Hydra Delta-10S 1.20 ft³ sealed · 0.85 ft³ ported
- Deaf Bonce Hannibal HSS-2810 D2 1.20 ft³ sealed · 0.85 ft³ ported
- Pioneer TS-A25S4 1.20 ft³ sealed · 1.09 ft³ ported
- DL Audio Gryphon Lite 10 V.2 (2+2) 1.20 ft³ sealed · 0.85 ft³ ported
- Soundstream TSQ-102 1.55 ft³ sealed · 1.09 ft³ ported
- Rockford Fosgate Prime R2SD4-10 (Shallow) 1.17 ft³ sealed · 0.81 ft³ ported
FAQ
What box does the Audiobahn DUB100 need?
Recommended net volume: 1.17 ft³ sealed, 0.81 ft³ ported tuned to 42 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn DUB100 Thiele/Small specs?
Fs 38 Hz, Qts 0.75, Vas 0.85 ft³, Xmax 0.31″, Sd 51.2 in².
What is the Audiobahn DUB100 mounting depth?
Mounting depth is 5 1/4″, cutout diameter 9 1/8″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn DUB100 handle and how do I wire it?
RMS power rating: 300 W. Wiring for several subs and amp power — in the wiring calculator.