Audiobahn AWP310T
10″ subwoofer · 1,000 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
- The spec sheet's Qts 0.514 doesn't match its Qes and Qms (they give 0.61).
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Tight and punchy · 0.80 |
|---|---|
| Fc | 39 Hz |
| F3 (−3 dB, no cabin gain) | 37 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 10 5/8″ |
Ported
deeper, louder| Tuning (Fb) | 37 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 21 1/8″ long |
| Port velocity at 1,000 W | 160 ft/s |
| F3 (−3 dB, no cabin gain) | 31 Hz |
| Example box (outside) | 25 1/8″ × 15 3/4″ × 6 7/8″ |
At 1,000 W this example’s port will be noisy: air speed 160 ft/s, while the limit is 82 ft/s. It stays quiet up to about 260 W. Full power needs a port of at least 19.5 in², which means a bigger box than this example — size it in the designer.
Open ported box in designerDeeper: 1.52 ft³ (43 L) tuned to 25 Hz, 31 1/2″ × 15 3/4″ × 8 9/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | — |
| RMS power | 1,000 W |
| Fs | 30.3 Hz |
| Qts | 0.61 |
| Qes | 0.761 |
| Qms | 3.19 |
| Vas | 0.41 ft³ |
| Re | 1.8 Ω |
|---|---|
| Sd | 53.6 in² |
| Xmax | 0.63″ |
| Vd | 33.8 in³ calc. |
| Mms | 401 g calc. |
| BL | 13.4 T·m calc. |
| EBP | 40 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 78.3 dB calc. |
Mounting dimensions
| Cutout diameter | 9 3/8″ |
|---|---|
| Mounting depth | 4 1/2″ |
| Overall diameter | 10 3/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- web.archive.org/web/20060317160248/http://www.audiobahn.com/Audiobahn06/images/t
- web.archive.org/web/20060317161941/http://www.audiobahn.com/Audiobahn06/images/t
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10N 10″ · dual 6 Ω
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Timpano TPT-T1000-10 D4 0.64 ft³ sealed · 0.85 ft³ ported
- Skar Audio SDR-10 D4 0.53 ft³ sealed · 1.66 ft³ ported
- Audison Voce II AV 10 D2 II (DVC 2+2 ohm) 0.81 ft³ sealed · 0.92 ft³ ported
- CT Sounds OZONE-10 D2 0.53 ft³ sealed · 0.81 ft³ ported
- CT Sounds OZONE-10 D4 0.53 ft³ sealed · 0.81 ft³ ported
- DL Audio Gryphon Pro 10 V.2 (2+2) 1.13 ft³ sealed · 0.85 ft³ ported
FAQ
What box does the Audiobahn AWP310T need?
Recommended net volume: 0.60 ft³ sealed, 0.85 ft³ ported tuned to 37 Hz — for one sub in a sedan at 1,000 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn AWP310T Thiele/Small specs?
Fs 30.3 Hz, Qts 0.61, Vas 0.41 ft³, Xmax 0.63″, Sd 53.6 in².
What is the Audiobahn AWP310T mounting depth?
Mounting depth is 4 1/2″, cutout diameter 9 3/8″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn AWP310T handle and how do I wire it?
RMS power rating: 1,000 W. Wiring for several subs and amp power — in the wiring calculator.