Soundstream XPRO-12
12″ subwoofer · dual 4 Ω · 200 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | not in the spec sheet: Re, Sd — typical value for the size used |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 200 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Flat and accurate · 0.67 |
|---|---|
| Fc | 54 Hz |
| F3 (−3 dB, no cabin gain) | 61 Hz |
| Example box (outside) | 14 3/16″ × 14 3/16″ × 10 1/16″ |
Ported
deeper, louder| Tuning (Fb) | 30 Hz |
|---|---|
| Port | slot 1 9/16 × 14 5/16″, 25 3/4″ long |
| Port velocity at 200 W | 47 ft/s |
| F3 (−3 dB, no cabin gain) | 28 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 12 3/4″ |
Deeper: 1.45 ft³ (41 L) tuned to 33 Hz, 31 1/2″ × 15 3/4″ × 10 1/8″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 12″ |
|---|---|
| Voice coils | dual 4 Ω |
| RMS power | 200 W |
| Fs | 27.3 Hz |
| Qts | 0.34 |
| Qes | 0.389 |
| Qms | 2.49 |
| Vas | 2.07 ft³ |
|---|---|
| Re (one coil) | ≈ 3.4 Ω |
| Sd | ≈ 76 in² |
| Xmax | 0.33″ |
| EBP | 70 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 86.9 dB calc. |
Mounting dimensions
| Cutout diameter | 11 1/8″ |
|---|---|
| Mounting depth | 6 3/8″ |
| Overall diameter | 12 5/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Soundstream 12″ models
- Soundstream EXACT 12 12″ · 4 Ω
- Soundstream PCW-12 12″ · dual 4 Ω
- Soundstream PSW.124 12″ · 4 Ω
- Soundstream PWS-12 12″ · dual 4 Ω
- Soundstream PXW-12 12″ · dual 4 Ω
- Soundstream PXW-12/2 12″ · dual 2 Ω
- Soundstream R1-12 12″ · dual 4 Ω
- Soundstream R1-12L 12″ · dual 4 Ω
- Soundstream R3.12 12″ · dual 2 Ω
- Soundstream RBW-12 12″ · dual 4 Ω
- Soundstream RFW-12 12″ · dual 4 Ω
- Soundstream RW-12 12″ · dual 4 Ω
Similar 12″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Diamond MD12.4 (MacDaddy) 0.74 ft³ sealed · 2.40 ft³ ported
- Resilient Sounds RS 12 D4 0.71 ft³ sealed · 2.33 ft³ ported
- Pride Junior Pro 12 D2 0.67 ft³ sealed · 2.19 ft³ ported
- Dayton Audio SS12-22 0.76 ft³ sealed · 2.44 ft³ ported
- Dayton Audio RSS315HO-4 0.74 ft³ sealed · 1.52 ft³ ported
- Morel Ultimo SC 124 (SVC 4 ohm) 0.74 ft³ sealed · 1.70 ft³ ported
FAQ
What box does the Soundstream XPRO-12 need?
Recommended net volume: 0.71 ft³ sealed, 2.26 ft³ ported tuned to 30 Hz — for one sub in a sedan at 200 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Soundstream XPRO-12 Thiele/Small specs?
Fs 27.3 Hz, Qts 0.34, Vas 2.07 ft³, Xmax 0.33″.
What is the Soundstream XPRO-12 mounting depth?
Mounting depth is 6 3/8″, cutout diameter 11 1/8″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Soundstream XPRO-12 handle and how do I wire it?
RMS power rating: 200 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.