SSA ZCON 15 D2

15″ subwoofer · dual 2 Ω · 2,500 W RMS

Fs 33.6 HzQts 0.29Vas 2.37 ft³Xmax 1.14″
The published specs don’t add up:

Recommended box

For a sedan, one sub, 2,500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.13 ft³ (32 L)
Qtc0.51
Fc59 Hz
F3 (−3 dB, no cabin gain)93 Hz
Example box (outside)17 5/16″ × 17 5/16″ × 10 5/16″
Open sealed box in designer

Ported

Net volume2.40 ft³ (68 L)
Tuning (Fb)34 Hz
Portslot 3 9/16 × 16 11/16″, 50 5/8″ long
Port velocity at 2,500 W74 ft/s
F3 (−3 dB, no cabin gain)35 Hz
Example box (outside)31 1/2″ × 18 1/8″ × 17 1/8″
Open ported box in designer
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs33.6 Hz
Qts0.29
Qes0.3
Qms6.79
Vas2.37 ft³
Re (one coil)≈ 1.7 Ω
Sd125.6 in²
Xmax1.14″
Vd143.3 in³ calc.
Mms311 g calc.
BL19.3 T·m calc.
EBP112 — suits ported calc.
Sensitivity, 1 W / 1 m91.3 dB calc.

General

Size15″
Voice coilsdual 2 Ω
RMS power2,500 W

Mounting dimensions

Ø≈ 15 3/16″cutout ≈ Ø14″mounting depth ≈ 7 1/16″magnet Ø≈ 9 1/16″
Cutout diameter≈ 14″
Mounting depth≈ 7 1/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other SSA 15″ models