SPL Dynamics SPL-380D1A
15″ subwoofer · dual 1 Ω · 1,500 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Dry and tight · 0.53 |
|---|---|
| Fc | 49 Hz |
| F3 (−3 dB, no cabin gain) | 73 Hz |
| Example box (outside) | 16 15/16″ × 16 15/16″ × 12 1/16″ |
Ported
deeper, louder| Tuning (Fb) | 34 Hz |
|---|---|
| Port | slot 4 1/2 × 16 5/16″, 33 1/2″ long |
| Port velocity at 1,500 W | 65 ft/s |
| F3 (−3 dB, no cabin gain) | 30 Hz |
| Example box (outside) | 31 1/2″ × 17 11/16″ × 22 7/16″ |
Deeper: 2.72 ft³ (77 L) tuned to 29 Hz, 31 1/2″ × 17 11/16″ × 18 5/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 15″ |
|---|---|
| Voice coils | dual 1 Ω |
| RMS power | 1,500 W |
| Fs | 32.4 Hz |
| Qts | 0.35 |
| Qes | 0.384 |
| Qms | 3.9 |
| Vas | 1.70 ft³ |
| Re (one coil) | 0.9 Ω |
|---|---|
| Sd | 141.7 in² |
| Xmax | 0.45″ |
| Vd | 64.1 in³ calc. |
| Mms | 595 g calc. |
| BL | 16.8 T·m calc. |
| EBP | 84 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 88.3 dB calc. |
Mounting dimensions
| Cutout diameter | 13 7/8″ |
|---|---|
| Mounting depth | 8 15/16″ |
| Overall diameter | 15 9/16″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 141.7 in².
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other SPL Dynamics 15″ models
- SPL Dynamics PRO-15D2 MK3 15″ · dual 2 Ω
- SPL Dynamics PRO-15D2 MK4 15″ · dual 2 Ω
- SPL Dynamics PRO-15D4 MK3 15″ · dual 4 Ω
- SPL Dynamics PRO-15D4 MK4 15″ · dual 4 Ω
- SPL Dynamics PRO-380D2 15″ · dual 2 Ω
- SPL Dynamics PRO-380D4 15″ · dual 4 Ω
- SPL Dynamics SPL-380D2 15″ · dual 2 Ω
- SPL Dynamics XTR-380D2S 15″ · dual 2 Ω
- SPL Dynamics XTR-380D4S 15″ · dual 4 Ω
Similar 15″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Fi Audio MT 15 D1 1.59 ft³ sealed · 3.71 ft³ ported
- Fi Audio TEAM 15 D1 1.62 ft³ sealed · 3.71 ft³ ported
- Fi Audio TEAM v2 15 D1 1.59 ft³ sealed · 3.71 ft³ ported
- American Bass XMAXXX-1522 1.64 ft³ sealed · 3.60 ft³ ported
- Ascendant Audio TEAM 15 D2 1.77 ft³ sealed · 3.71 ft³ ported
- Fi Audio MT 15 D2 1.59 ft³ sealed · 3.71 ft³ ported
FAQ
What box does the SPL Dynamics SPL-380D1A need?
Recommended net volume: 1.31 ft³ sealed, 4.20 ft³ ported tuned to 34 Hz — for one sub in a sedan at 1,500 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the SPL Dynamics SPL-380D1A Thiele/Small specs?
Fs 32.4 Hz, Qts 0.35, Vas 1.70 ft³, Xmax 0.45″, Sd 141.7 in².
What is the SPL Dynamics SPL-380D1A mounting depth?
Mounting depth is 8 15/16″, cutout diameter 13 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the SPL Dynamics SPL-380D1A handle and how do I wire it?
RMS power rating: 1,500 W. Dual 1 Ω voice coils: series gives 2 Ω, parallel gives 0.5 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.