Power Acoustik GW3-15

15″ subwoofer · dual 2 Ω

Fs 31.2 HzQts 0.99Vas 2.52 ft³
The published specs don’t add up:

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume2.83 ft³ (80 L)
Qtc1.37
Fc43 Hz
F3 (−3 dB, no cabin gain)32 Hz
Example box (outside)31 1/2″ × 18 1/2″ × 11 1/2″
Open sealed box in designer

Ported

Net volume4.80 ft³ (136 L)
Tuning (Fb)33 Hz
Portslot 1 9/16 × 17 1/16″, 9 7/16″ long
Port velocity at 300 W62 ft/s
F3 (−3 dB, no cabin gain)26 Hz
Example box (outside)31 1/2″ × 18 1/2″ × 18 13/16″
Open ported box in designer
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs31.2 Hz
Qts0.99
Qes1.274
Qms4.53
Vas2.52 ft³
Re (one coil)2.18 Ω
Sd≈ 124 in²
Xmax≈ 0.39″
EBP24 — suits sealed calc.
Sensitivity, 1 W / 1 m84.3 dB calc.

General

Size15″
Voice coilsdual 2 Ω
RMS power—

Mounting dimensions

Ø≈ 15 11/16″cutout Ø14 1/2″mounting depth 7 1/2″magnet Ø≈ 9 7/16″
Cutout diameter14 1/2″
Mounting depth7 1/2″

The spec sheet's Sd of 176.7 in² is the area of a 15″ circle, not the cone's radiating area — not used.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Power Acoustik 15″ models