Fi Audio SSDv4 18 D2
18″ subwoofer · dual 2 Ω · 1,500 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Flat and accurate · 0.74 |
|---|---|
| Fc | 56 Hz |
| F3 (−3 dB, no cabin gain) | 56 Hz |
| Example box (outside) | 20 1/16″ × 20 1/16″ × 14 3/16″ |
Ported
deeper, louder| Tuning (Fb) | 34 Hz |
|---|---|
| Port | slot 2 9/16 × 19 7/16″, 32 1/2″ long |
| Port velocity at 1,500 W | 63 ft/s |
| F3 (−3 dB, no cabin gain) | 36 Hz |
| Example box (outside) | 23 15/16″ × 20 7/8″ × 18 7/8″ |
Deeper: 5.97 ft³ (169 L) tuned to 32 Hz, 31 1/2″ × 20 7/8″ × 23 11/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 18″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 1,500 W |
| Fs | 34.8 Hz |
| Qts | 0.47 |
| Qes | 0.5 |
| Qms | 6.89 |
| Vas | 3.57 ft³ |
| Re (one coil) | 1.4 Ω |
|---|---|
| Sd | 187.6 in² |
| Xmax | 1.10″ |
| Vd | 206.7 in³ calc. |
| Mms | 429 g calc. |
| BL | 16.2 T·m calc. |
| EBP | 70 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 91.3 dB calc. |
Mounting dimensions
| Cutout diameter | 16 3/4″ |
|---|---|
| Mounting depth | 11 3/4″ |
| Overall diameter | 18 1/2″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Fi Audio 18″ models
- Fi Audio BL-NEO 18 D1 18″ · dual 1 Ω
- Fi Audio BL-NEO 18 D2 18″ · dual 2 Ω
- Fi Audio BL18v3 D1 18″ · dual 1 Ω
- Fi Audio BL18v3 D2 18″ · dual 2 Ω
- Fi Audio BL18v3.1 D1 18″ · dual 1 Ω
- Fi Audio BL18v3.1 D2 18″ · dual 2 Ω
- Fi Audio BTL-NEO18 D1 18″ · dual 1 Ω
- Fi Audio BTL-NEO18 D2 18″ · dual 2 Ω
- Fi Audio BTL3 18 D1 18″ · dual 1 Ω
- Fi Audio BTL3 18 D2 18″ · dual 2 Ω
- Fi Audio BTL4 18 D1 18″ · dual 1 Ω
- Fi Audio BTL4 18 D2 18″ · dual 2 Ω
Similar 18″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Sundown Audio NSv2-18 D2 2.19 ft³ sealed · 2.90 ft³ ported
- American Bass VFLCOMP-1822 2.12 ft³ sealed · 2.75 ft³ ported
- American Bass GF-1811 2.40 ft³ sealed · 2.83 ft³ ported
- Audioque HDC318-A D1 1.70 ft³ sealed · 3.07 ft³ ported
- Sundown Audio Zv3-18 D2 2.75 ft³ sealed · 3.00 ft³ ported
- Incriminator Audio Death Penalty 18 D1 2.37 ft³ sealed · 3.46 ft³ ported
FAQ
What box does the Fi Audio SSDv4 18 D2 need?
Recommended net volume: 2.30 ft³ sealed, 3.00 ft³ ported tuned to 34 Hz — for one sub in a sedan at 1,500 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Fi Audio SSDv4 18 D2 Thiele/Small specs?
Fs 34.8 Hz, Qts 0.47, Vas 3.57 ft³, Xmax 1.10″, Sd 187.6 in².
What is the Fi Audio SSDv4 18 D2 mounting depth?
Mounting depth is 11 3/4″, cutout diameter 16 3/4″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Fi Audio SSDv4 18 D2 handle and how do I wire it?
RMS power rating: 1,500 W. Dual 2 Ω voice coils: series gives 4 Ω, parallel gives 1 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.