Audiobahn ALUM15Q

15″ subwoofer · dual 6 Ω · 1,100 W RMS

24.4 HzFs, resonance
0.57Qts
4.59 ft³Vas
0.63″Xmax
1,100 WRMS

The Audiobahn ALUM15Q is a 15″ subwoofer. With Qts 0.57 and EBP 39 it suits a sealed box: tight bass in a small enclosure; a ported box would need a lot of volume.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 1,100 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
3.00 ft³ (85 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.90
Fc39 Hz
F3 (−3 dB, no cabin gain)34 Hz
Example box (outside)31 1/2″ × 18 1/8″ × 12 3/8″
Open sealed box in designer

Ported

deeper, louder
3.67 ft³ (104 L)
Net volume
Tuning (Fb)30 Hz
Portslot 2 9/16 × 16 11/16″, 29 1/8″ long
Port velocity at 1,100 W63 ft/s
F3 (−3 dB, no cabin gain)28 Hz
Example box (outside)31 1/2″ × 18 1/8″ × 17 11/16″
Open ported box in designer

Deeper: 5.12 ft³ (145 L) tuned to 28 Hz, 31 1/2″ × 18 1/8″ × 23 3/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size15″
Voice coilsdual 6 Ω
RMS power1,100 W
Fs24.4 Hz
Qts0.57
Qes0.63
Qms5.64
Vas4.59 ft³
Re (one coil)5.5 Ω
Sd131.8 in²
Xmax0.63″
Vd83 in³ calc.
Mms335 g calc.
BL21.2 T·m calc.
EBP39 — suits sealed calc.
Sensitivity, 1 W / 1 m86.8 dB calc.

Mounting dimensions

Ø15 1/2″cutout Ø14″mounting depth 7 1/4″magnet Ø≈ 9 1/8″
Cutout diameter14″
Mounting depth7 1/4″
Overall diameter15 1/2″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 15″ models

Similar 15″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn ALUM15Q need?

Recommended net volume: 3.00 ft³ sealed, 3.67 ft³ ported tuned to 30 Hz — for one sub in a sedan at 1,100 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn ALUM15Q Thiele/Small specs?

Fs 24.4 Hz, Qts 0.57, Vas 4.59 ft³, Xmax 0.63″, Sd 131.8 in².

What is the Audiobahn ALUM15Q mounting depth?

Mounting depth is 7 1/4″, cutout diameter 14″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn ALUM15Q handle and how do I wire it?

RMS power rating: 1,100 W. Dual 6 Ω voice coils: series gives 12 Ω, parallel gives 3 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn ALUM15Q better sealed or ported?

EBP 39: a sealed box (3.00 ft³) suits it best — tight bass in a compact enclosure. Ported is possible (3.67 ft³, tuned to 30 Hz) but larger.

What port does the Audiobahn ALUM15Q need?

For the 3.67 ft³ ported box tuned to 30 Hz: slot 2 9/16 × 16 11/16″, 29 1/8″ long, area 42.7 in²; or a round port Ø7 3/8″, ≈ 29 1/8″ long. Port air speed at 1,100 W: 63 ft/s.

What box do two Audiobahn ALUM15Q subs need?

Two subs need twice the volume: 6.00 ft³ sealed, or 7.35 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.